Description Hall table with drawer / Desk.

Serial No 300417 2 Series 800

Design Table is individual and unique design hand made in Tasmania. Table top is fixed at front but has a sliding mechanism at the rear to allow for timber movement due to expansion and contraction.

Construction Table top consists of widths of celery top pine, Huon pine, blackwood, Huon pine and celery top pine in alternate strips. Body is celery top pine with blackwood strips in front. Legs are myrtle. Table is all solid naturally grown Tasmanian timbers (no veneer).

Finish There are no coloured wood stains used - only oil and wax. The table is finished in two coats of Scandinavian Oil. The top is further polished with natural Traditional Wax.

Dimensions Top is 750mm wide and 460mm front to back.The top is 785mm above floor level. Legs are 845mm tall. Maximum width (front) is 960mm. Drawer is 490mm wide, 310mm front to back and 80mm deep.

Taking care of your table Wipe over with a clean dry cloth. If finish ever need rejuvenating, apply a light coat of wax polish and polish with dry cloth. Keep out of direct sunlight as much as possible and keep dry. Over time the colour of the timber will change - this is normal. With proper care this table should last at least a lifetime.